Large-bore ball valve in the workshop

Products

Shut-off and control valves, actuators and accessories for oil and gas production, processing and transport. We select the configuration from the customer's datasheet.

Product range

What we supply

Valves and wellhead equipment for oil and gas, plus spare parts and components for valves in service.

Catalogue

Valve catalogue

Pick a valve type and send a request: an engineer will confirm the design, size and pressure class for your datasheet.

BV-TE

Top-entry ball valve

Ball and seats are reached through the bonnet, so the valve is serviced without cutting it out of the line.

Request a quote
BV-SE

Side-entry ball valve

Two- or three-piece bolted body for pipeline and process service.

Request a quote
BV-DBB

Double block and bleed ball valve

Two seals and a cavity bleed in one body for positive isolation.

Request a quote
BV-WT

Wedge top-entry ball valve

Seats are wedged against the ball mechanically for tight shut-off in abrasive, severe service.

Request a quote
BV-MS

Metal-seated floating ball valve

Side-entry floating ball with metal seats for erosive, corrosive and low-temperature duty. Seals in both directions.

Request a quote
GV-SL

Slab gate valve

Through-conduit single slab: full bore for pigging, double block and bleed, metal-to-metal seat seal.

Request a quote
GV-EX

Expanding gate valve

Gate and segment wedge apart at the end of stroke and seal both seats. Works in both flow directions.

Request a quote
GV-CX

Compact expanding gate valve

The same expanding principle in a shorter, lighter body. Soft or metal seats, serviceable in line.

Request a quote
GV-WG

Wedge gate valve

Solid, flexible or split wedge with a bolted or pressure-seal bonnet.

Request a quote
GV-PS

Parallel slide gate valve

Spring-loaded parallel discs with metal seats for high-temperature steam.

Request a quote
GLV

Globe valve

Bolted or pressure-seal bonnet; straight, angle and Y-pattern bodies; contoured plugs for throttling.

Request a quote
CV-SW

Swing check valve

Hinged disc with low pressure drop for steady, low-velocity flow.

Request a quote
CV-NZ

Nozzle check valve

Spring-assisted axial disc closes fast and limits pressure surge.

Request a quote
CV-TD

Tilting-disc check valve

Pivoting disc that stays stable across a wide flow range.

Request a quote
CV-DP

Dual-plate check valve

Wafer body with two spring-loaded plates: light and compact.

Request a quote
FCV

Control valve with actuator

Flow and pressure control in process lines, supplied with actuator and positioner.

1½″ CL600 · 3″ CL150–600 · 4″ CL300

Request a quote
BV-C

Control ball valve

Characterised ball for modulating flow, throttling and noise control.

Request a quote
AXC

Axial flow control valve

Axial trim for precise, low-noise pressure and flow control.

Request a quote
HIPPS

Axial flow HIPPS valve

Fast-acting axial valve for high-integrity pressure protection systems.

Request a quote
HF

HF alkylation valves

Designed for hydrofluoric acid service in alkylation units.

Request a quote
CRY

Cryogenic valves

Ball, gate, globe and check designs for LNG and other cryogenic service.

to −196 °C · up to 36″ · Class 2500

Request a quote

Design parameters

A guide for completing your datasheet. We select the exact configuration to suit operating conditions.

ParameterRange
Nominal sizeDN 15–1200 · NPS ½–48
Pressure classASME CL150–2500 · API 5000–15000 psi
StandardsAPI 6D · API 6A · ASME B16.34
MediaOil, gas, gas condensate, water, H₂S media (sour service per NACE MR0175)
OperationHandlever, gearbox, pneumatic, hydraulic and electric actuator
DocumentationValve passport, test report

Item not on the list?

Send us your datasheet. We will select a configuration, propose an equivalent, or repair your existing valves.

Catalogue (PDF)

  • The product catalogue and standard datasheets are being prepared for publication. Ask our engineer for the current version.